How To Install Replace 4x4 Axle Actuator Chevy Silverado GMC Sierra 1999-06 - 1AAuto.com




People Who Liked This Video Also Liked

How To Install Replace Front Axle CV Joint Chevy Silverado Suburban GMC Sierra 00-07 1AAuto.com
How To Install Replace Front Axle CV Joint Chevy Silverado Suburban GMC Sierra 00-07 1AAuto.com
GM 4WD elect actuator
GM 4WD elect actuator
1995 Chevy K1500 - 4x4 Thermal to Motorized Actuator Upgrade
1995 Chevy K1500 - 4x4 Thermal to Motorized Actuator Upgrade
Chevy and GMC Transfer Case Problem
Chevy and GMC Transfer Case Problem
Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC Truck
Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC Truck

Did this video help you?

Jock Jimenez: Do I have to pick up the motor of a 2010 Chevy Silverado to reinstall my front differential???

raymond sherman: 2003 Yukon 2500. 2 HI, 4 HI and 2 Low lights all work on dash. I can hear the transfer case motor working. I can feel the truck drag when engaging the transfer case. Drained the fluid in the transfer case all looks good. My mechanic confirmed the output from the transfer case spins the front drive shaft. The front wheels spin on the lift. But under load no 4wd. I am replacing the front axle actuator. I bet this is the issue. Thanks!

todd smith: I have a 2006 Silverado 1500 with the manual floor shift transfer case and when I shift to 4wd the transfer case does go in high and low gear but the front wheels do not engage just a clunking sound..???? I have changed the front axle shift actuator...what could be causing this??

Seventh Ward: i have a 97 chevy 2500 and itll shift into high and low but not 4wd. the drive shafts shifts but not the front end.

John Reid: I feel stupid but I can't get mine back in anyone else have this problem?

Happy Trails: Is it possible that the actuator is keeping my front axles from disengaging?

Jonathan Oakley: I love how these mechanic channels show the part comming off so easy lol yah right. Plastic actuator in an aluminum housing. Ive had one not break off. Word of advice, if you do snap one off, get yourself a hacksaw blade, a large and small chisle, a flat head screw driver and some penatrant oil. Oh and some patience not to ruin the threads prying the plastic out.

Raymond Hendrix: saftey glasses

Martin Gomez Jr: have an '04 SILVERADO z71 that's stuck in 2high, manual 4x4 shifter won't move at all. stuck

D B: i have a suburban 04 z71. how do i do lift kit

D B: gracias por todos sus vídeos me an ayudado mucho

Tomas Flores: grasias. a Dios ustedes lo asen muy bien yo pude areglar mi chevy y ahora ya puedo usar 4x4.

Shawn Purifoy: I have a 2007 Silverado classic LS and my new actuator will not extend. My tcase engages when put into 4wd, but the 4wd axle actuator does nothing. Any ideas?

jesus andaverde: I have a 2004 silverado 1500 ltz...my 4low engages fine but when I try 4hi light only blinks and goes back to 2 wheel drive...4hi wont engage..could this fix the problem

Nicholas Dean: Hi will a wheel speed sensor thats gone bad not gove power to the front wheels also? Thanks

Gerry Litts: hey thank you for the Very professional video

Bryan Almond: I have a 2002 gmc 1500 z71 4x4 I replaced cv axles and hubs recently and we just got a first snow and went to turn the 4 wheel hi on (push button ) the light flashes says in 4wd and feels like it is 4 wheel (maybe on one side) but it makes a rubbing/grinding nosie does it worst turning the wheel too what could it be ? Mind u I can't hear the transfer case to engage either ÷

April White: My 1993 Chevy 1500 4 wheel drive will not shift into 4 wheel drive it says its in 4 wheel drive but no 4 wheel drive why is that and what is wrong

Wave Crusher: +1A Auto Parts, I was following this video to help replace the actuator in my 2002 gmc 2500hd, when I took out he old actuator it came out very hard, and there was plastic strips coming off the threads. I tried to screw the new actuator in but it would not go in, it was kinda catch but then pop back off the threads. It started to go in once but was very hard, I pulled it out and the first line of threads was stipped completly off...what would cause that? was is the wrong actuator? It looked exactly like the one that was on there. I believe then one I had as the good one was from an older truck like a 98 chevy 1500 with push button 4x4

ArmaAceChannel: anyone recommend dropping the whole front axle for replacing the oil pan gasket?
Rating:
How To Install Replace 4x4 Axle Actuator Chevy Silverado GMC Sierra 1999-06 - 1AAuto.com 5 out of 5

Featured Video

How to Insulate Walls


How To Install Replace 4x4 Axle Actuator Chevy Silverado GMC Sierra 1999-06 - 1AAuto.com