Moparking950: Can you load an sks from a stripper clip into the drum? I will add the to my list of future purchases.
GunSlinger615: Im glad mine fit right in great video
Ron Huie: My Norinco SKS was a little different with it's problems but video helped greatly! I filed down the top part of my Centerfire Systems drum (same as his) and bolt doesn't catch any more. Took a lot of trial and error but after 45 minutes my drum finally useable after laying around for 6 months. Great ideas on the sharpie to see where it keeps catching...
HackNtheBox: China Arsenal 26
HackNtheBox: weld a small bead on the left side of the mag to allow the bullet to rest up against the bead this will push the bullet better into position ....this was covered in the video part II.....pay attention
RAGINGKODIAK: Very helpful in fitting my drum to my norinco sks. Having issues with bullets feeding to chamber. Bullets sitting to far to the left and too low for carrier to chamber.
Eric V: Do you know what country your gun is from?
HackNtheBox: Part II has been uploaded
SKS Drum Magazine Custom Fit Mod... PART I5
out of 5