DIY Koi Pond Filter Part 2 - Maintenance




People Who Liked This Video Also Liked

DIY BEST DESIGN FOR A KOI POND FILTER FLUSH PART 2
DIY BEST DESIGN FOR A KOI POND FILTER FLUSH PART 2
Waterfall Filter Plumbing - KP 2
Waterfall Filter Plumbing - KP 2
DIY Air Lift Koi Pond Vacuum (Part 2/3)
DIY Air Lift Koi Pond Vacuum (Part 2/3)
DIY Air Lift Koi Pond Vacuum (Part 1/3)
DIY Air Lift Koi Pond Vacuum (Part 1/3)
AMAZING DIY KOI POND FILTRATION SYSTEM
AMAZING DIY KOI POND FILTRATION SYSTEM

Did this video help you?

Mark Powel: please can you tell me how you built it and what size pipes you used because its a really good idea because am new to this´╗┐

mp3dash: nice setup. have you got video or pics of the build. What the pipe coming through the lid for what that used for...

Paul Blundell: Hi do you have a video of how you did this please

WizardAt69: @Mostlyfun if it works good for you

WizardAt69: @DanielOzzie just in stage 2. I now place an a few airstones in stage 1 but only to agitate it whilst cleaning

WizardAt69: @FLUNGcrap yes aquarium silicone

ricky n: what did you use to seal the 4" pipe is that silicone or something ??????

boyracerdestroyer23: wizard in bin 1 why dont you add airball to agitate the k1 when cleaning ? just like the eazypod be more efficient ? gonna go ahead today and build mine got 75 litres k1 see how it goes from there , any ideas for finally polishing the water , or is none required , also got a protein skimmer coming ,reckon i should use this before the first bin ,gravity dropped thanks

WizardAt69: This filter has now been running successfully on a 3000 gallon pond for about a year. Kaldnes K1 has been proven in fish farming "Koi are typically fed at between 1% - 2% of body weight per day. For every 5 grams of food fed,1 litre of K1 media is required in the moving bed bilogical stage " - in my example 65 litres would easily support 325g food/day [or 16kg [35lbs]of koi]. Just add more stage 2 bins to support more fish. K1 in my opinion is fantastic stuff.

boyracerdestroyer23: great so 100 litres of k1 , but what is the water quality like and what size pond ? ive got 1300 gallons heavily stocked will it cope? thanks again

WizardAt69: 35 litres in mechanical stage [bin 1], 65 litres in biological stage [bin 2]

boyracerdestroyer23: great , how much k1 did you use in each bin ? thanks

WizardAt69: @ANTUK4 The pond pump tops up the filter. The pond water is topped up with pre treated water

WizardAt69: @Zeamus634 This prototype was flushed into a bucket to enable ease of checking the flushed water

PR0CRASTINAT0R: It would be great to have an experienced ponder like you on our site! I like your pond videos and want to invite you to join a pond site to share your stuff! Please join the new OldGardenPond,com group today! I learned a ton of stuff and it gave me the motivation to finish up my own pond. POST EVERY DOG-GONE POND PICTURE AND VIDEO YOU GOT! Sign the Guest Book and let us hear you on the message board. This site will be rocking, because you will make it happen!

Zeamus634: Why don't you connect a pipe to the discharge valve and put it down the drain instead of using a tub?
Rating:
DIY Koi Pond Filter Part 2 - Maintenance 5 out of 5

Featured Video

How to Insulate Walls


DIY Koi Pond Filter Part 2 - Maintenance