TwoStarII: If I enter my public IP address the page does not redirect to the dvr web
service but instead connects to my router web service, so I changed my dvr
to port 81 then receive page not found, I also tried port 37777 which is
the tcp port on the drv still no luck, I can connect to the dvr web service
only via private ip and not from outside. what am I missing?
garry62be: Working on all my pcs after watching thank you,but can't get nothing on my
iPads or iPhone? Got seculink and bt hub 4.tried different software,same
software,just typing into browser,software loads but no camera pics on pad
or phone yet there on pcs? Any clue would help been at it 2 days would have
been much longer without your vid thanks
kayum Radjabov: so hard to get to point
rimmalek: salam aziz shadidan be komaket ehtiaj daram . email , tel ya nemidoonam !
MIKHAM DVR RO ROUTER CONECT KONAM NEMISHE !!! LOTFAN !!!
Wail Abdalla: Is it possible to configure samsung CCTVs in MAC PC?? I am looking for a
solution to fix it out. Samsung Technical Supporters doesn't have a
Kemlong Svay: I can view my DVR H264 with public IP on pc browser but i can't view it on
smart phone and App for phone help please
john smith: Now the French can run away even faster!
Emmanuel Izuakor: Hello...Thanks for the video guide.
i need to ask..
Do i need an internet connection with a Static IP..?
i have an internet connection from a GSM network
the IP changes most times...
i don't know is this is the reason why i haven't been able to setup this
remote viewing on my cctv.
noer mandala: ok sip
L Infekto: Problem! followed all steps. port forwarded as well. Found public IP..
typed it in the search bar... 'page can not be displayed.. help please
Robert Bradley: great video...
sardarhesam: This is too Long , you need to improve that obvious IR....N accent , make
an effort go back to the English school and learn how to pronounce the
words right , before that let someone who speaks better that you or at
least can pronounce the word ( Router ) do this , this should take 30 min
max not an hour , Overall helpful :-)
ramdan tea: thank u
Frell Fernando: Setting up a CCTV system at home is easy as ABC and setting the remote view
setting is even more easy....... why pay for technicians.
Idelson Rui: Helpful. Can you please explain to me how to set up my Samsung SRD-1650 DVR
for remote conection?
Siônmarc Simpson: Was a great help thank you ;)
marialeonorapacho: Can you please get to the point? :p
Biken Maharjan: Nice video but it's called router ,not rooter, I think.
Ahmed Babiker: very helpful
dkbuk: thanks for putting this info into a very helpful format
SLYSKY: Excellent video, helped me set my Avtech up straight away. Although;>>
What's the settings for push notification on dvr ??
What do you put in FTP Server in dvr?
I got it to work only once and am not sure which settings i changed and not
working properly now.
JAREST4125: Thanks for taking the time to put this very informative video on YouTube. I
can now view cctv dvr from outside of my LAN.
Gordon M-Kennedy: Great video, but unfortunately this does not work when trying to remote
view on a Mac. I have been looking around for a while now for a solution to
this problem, but it seems like no one can find one! I can view on Iphone,
Ipad, PC, Android etc, but not on a Mac which is very frustrating!
chandu sekhar: how to connect the dvr with online
Omid Pajooh: Thank you for sharing
rimmalek: aziz kheily alee va kamel boood . kolan systemo gereftam .accent ham kheily
bahal va ghabel fahm boood , be ye seri az hasooodaye oskol tavajoh nakon.
keep it up the good work .
Sal Cameli: If you buy a Lorex you can access your cameras with a free app and it takes
under 2 mins to set up.
Check out the Lorex 1896
zishan rashid: Thanks
Bhathiya Kannangara: i watch my h.264 dvr on my pc via internet .how i watch dvr on mac?
tombstones: Hi require software to view cctv on pc can you give me a link please
great video cheers
Gary Templemain: Thank you for your video and your effort but the video wanders about is
boring and unorganized though you seem to know what you are on about. I
would appreciate your efforts on another video but concise, defined. For
example 1: do this to get your local IP address and other details. 2: do
this to get your public address. 3: do this to tell if you have a static
address. 4: to get local access LAN to your DVR 5: now do this to set up
router. 6: Do this to get access to wide area WAN ( internet) access. If
it's to hard to do in one video, make several taking on each section
clearly. regards gary
CircusAviation: Thank you. Very helpful. I was being driven crazy. I couldn't remember how
I had set up my mobile phone software. I couldn't work out, why I could not
get it to work. Then you reminded me...I had to use the public IP to access
the DVR and not the DVR IP!! Thanks again.
rafael beringuela: very informative , it helps me alot thanks...
mark brack: excellent presentation thanks
Lovely Luffy: can u tell me how to know what is my DynDns Adress or i need to register
DynDns Address ?
Charles Long: Great video. Excellent explanation of IP addresses, WAN, LAN and how they
interact with router and other devices. Thanks
L Ratcliffe: Hi, I do this sort of thing for a living and your video is very good!. it
will help a lot of people out there who have installed their own systems
and need to view their camera's remotely. Keep up the good work :)
suleman shahzad: im still confused and ive watched this lyke 5xz
Paul Lennon: HI EXCELLENT VIDEO, i am stuck on the public ip address, i can see it on my
iphone when i inside the house, when i try to view it outside nothing
happens, i try putting public ip address in same result. please help
james caberte: any help are appreciated...
bowenssupremacy: Nice video. Can you please explain or make a video showing how to port
forward a WATCHBOT dvr thru an Apple airport router model A1409.
MoTechnTravel: This is the wrong way to the do the job sir. 1. you dont put the dvr on
DHCP, cause the router would change the IP. 2. You dont open DMZ which is
the same as screwing your whole network. 3. Static IP is an expensive game.
In short the steps and process are not the way which is secure and easy.
hosvil1358: Hey I have Adata dvr with 3 camera, an AOL modem rooter. I have installed
pro survalience software. I have connected dvr to modem with network cable.
quick start say enter 192.168.1.108 on explorer to access dvr but i cant
access it. can you help?
nangarhar mastofiat: hi thanks from the video which you share here but one thing i need your
help how we access the IP address which we submit to dvr i can not access
it from remote area i mean from other network i need your help in this
Taous Khan: i really appreciate your work . it really help me to connect my dvr with bt
hub . thank you so much . God Bless you
googlesux: Helps alot.Can you explain how to setup DynDns adress? Great video.
How to Setup a CCTV DVR for remote viewing online by PC Mac & smart phone internet Access 85170220124.6
out of 5