Johndeere110: How do you put your gas into it with the cab on the hood? my john deere 110 gas tank is under the hood
MichaelTJD60: Nice 110 but you can't let it idle that low, they have a slinger for an oil pump so if it idles too low there's not enough pressure to get the oil to all the parts of the cylinder and you will burn that Kohler up.
Alex Peterson: DO you have your Plans on how you built that I could copy or borrow so I can build one for my 65 JD 110??
SikuProductions32: Wow nice
How much t/min can it!
youroldbuddy1: Wow do I love the design of how you built that cab.
Androu01: Wow, quite nice.
I am searching a snowblower for a John Deere 110 same as your (1974 or 1975). Have you any suggestion to find one near Canada (province of Quebec, Montreal).
mineus3: Hey, I used door hinges from a hardware store
I welded the hinges through the bolt holes instead of bolting them on. Then I took an angle grinder and ground off the bottom part of the hinge pin so the pin would pull out from the top so I can remove the doors whenever I want to. When I want to re-install, I just hold the doors in place and slide the pin back through the holes.
Jake Wind: Hey I would like to know how you mounted your doors.
Jacob Wilhelm: I really like your tractor cab and i want to know how you built it because i want to build one for my plowing tractor
Jod Bronson: Very nice job :), just a little boxy :(
318dodgeN350camaro: how do you put gas into it
mineus3: @flurpy123 I used the same as all the other skins. Underlayment. It is wood, but I have multiple coats of paint on it, and it's always kept in the garage so it should be good for many years. Even if the roof gets old, it's only like $15 to re-do it.
mineus3: @Brians4x4Life Thank you for the comment! I like to draw up plans too, but I have found it easier for myself to just "go with the flow" when I am building. Plans always look great on paper, but rarely turn out for me. I just start building, and design as I go. Just a tip, add more windows than you think you need. It is really nice to be able to see what or who you are about to run over =)
Brians4x4Life: Awesome! i want to build one for my WH C160 now so bad!
I have a welder just need the metal and plan it out.
I really like yours.
I love how you can keep it on and remove the doors.
It would be cool to remove the window in the front as well in summer. :)
anyway you got me thinking...
I am about to buy a original cab company one so I will use that for now but making a more sturdy one like you is better in my opinion. Add some tunes in there! :)
mineus3: @flurpy123 I suppose I could, but one issue with that is the doors would stick out a couple feet behind the tractor then. I'd also have to bungie the doors together so they would swing all over the place when I turn corners.
mineus3: @1944johndeerel - I have a 116 that doesn't even come close to starting as easy as the 110. I'm sure the newer ones with all the epa garbage are even more tough once things start getting worn out.
1944johndeerel: my 210 starts just that easy even in the dead of winter. cant say that much for most modern machines with the epa carbs.