TacticalAce89: You should polish the bolt carrier too..
Daniel Stein: looks great man! just one can of CermaCoat did the trick?
Martha Cantu: Nice looking Draco! I've got my paint but was wondering if you removed the
spring(s) from the trigger group before baking? I was told not to heat any
of the springs as they might not work after heating. Any insight on that?
Also, were you able to finish the gun and magazine with one (1) 4oz. can??
Thanks in advance.
XX7Saint: @MilitantPIG Thanks! It's called a sling plate and I got it from parallax
XX7Saint: @davidjweld I just bought the entire set, butt stock and all. If you don't
want to do that, try ironwood designs. Matt makes some awesome furniture
for AK variants and you don't have to buy the butt stock, just the pistol
grip and hand guards.
XX7Saint: @peanut5104 I didn't paint the internals. As for the end of the barrel, I
shoved a cleaning patch in it to keep the paint out.
XX7Saint: @redavis205 I bought it from Brownells.
redavis205: Also, what about that sling, Where did you find that?
davidjweld: where did you order your hand guard and grips? i can only find it in a set
that includes a butt stock.
vrollen: looks great!
XX7Saint: @redavis205 It was an old sling from an SKS that I had laying around.
XX7Saint: @vrollen Thank you
XX7Saint: @MilitantPIG Awesome! I think it's a great addition to the Draco. Let me
know how it works out for you.
XX7Saint: @smasci No i did not.
peanut5104: Hey guys,, Stupid question 1. Do you coat/paint the interior surfaces of
the complete gun? obviously not the chrome lined barrel.
Dissassemble/Degrease/Hang/Spray Did you place somthing in the ends of
barrell to keep out ceramic-coat? How hard is it to remove wood grips? I am
buying Drsaco this week so maybe these questions will answer themselves.
redavis205: Where did you buy the CeramaCoat Spray?
XX7Saint: @TacticalAce89 Actually,it's pretty easy. You just have to make sure you
degrease the weapon properly, spray the finish on in light even coats and
bake it. Just take your time and remember, the prep work is important.
Clean metal surfaces are a must.
XX7Saint: @GREEDY602 I bought it from an online vendor.
XX7Saint: @Transporter1022 I got the Sling Plate from parallaxtactical . com
Fresishedn: DAYUMNN thats from a phone? good ass quality!
MilitantPIG: @XX7Saint Very cool, thanks for the info... Checking it out now.
XX7Saint: @davidjweld Hey thanks for watching and for the comment. The safety is from
Krebs Custom. It makes engaging the safety so much easier. The sling plate
is from parallax tactical. The wood furniture is from Tapco. It's their
Timbersmith line. As for the finish, I used wire and hung the parts up and
sprayed them all at once and then hung them from the rack in the oven. It
was actually pretty easy. I hope this helps. If you have an more questions,
let me know.
XX7Saint: @Fresishedn Yeah, I took the video with my HTC EVO.
davidjweld: thanks, you have great taste in gun mods
TacticalAce89: Hey is refinishing your metal hard? Because I want to try it myself, that
would be a good thing to know how to do....
Mr. M85 PAP: Looks great!! Ill be gettibg mine in a few weeks
Eslamizar: Does your Draco have a chrome lined barrel?
XX7Saint: @Eslamizar Yes it does have a chrome lined barrel.
XX7Saint: @GREEDY602 I bought it from parallax tactical.
MilitantPIG: Hey Brother, Sweet Draco! Where did you find that Sling Mount?
XX7Saint: @MrBigBearBrown I agree
daredevill0407: Add a stock cus right now it lks lk a sub, but nice vid!
MrBigBearBrown: Be sure you air and clean your oven well. Those chemicals can be real bad
davidjweld: what a great project! i have this gun on back order, and had some of the
same mods in mind. where can i get the safety, sling plate, and grips? when
refinishing, do you spray and bake one side, flip it, then spray and bake
the other? your gun turned out great and the video was very helpful
Transporter1022: Where did you get the sling plate?
MilitantPIG: I got the sling plate, Thanks again for the tip!
gumbee78: nice job man! looks great .thanks for all the info, just bought a draco two
weeks ago thinking of refinishing it as well.