Exceed RC 2.4GHz TX 3D Helicopter Basic Tutorial




People Who Liked This Video Also Liked

Exceed RC 2.4GHz TX 3D Helicopter Basic Tutorial
Exceed RC 2.4GHz TX 3D Helicopter Basic Tutorial
Basic Flight Instructions using the Exceed RC Blue Ray Helicopter
Basic Flight Instructions using the Exceed RC Blue Ray Helicopter
Exceed RC G2 Raptor Brushless RC Helicopter 2.4Ghz 3D 6ch 6-Channel
Exceed RC G2 Raptor Brushless RC Helicopter 2.4Ghz 3D 6ch 6-Channel
Exceed RC G2 Raptor Brushless RC Helicopter 2.4Ghz 3D 6ch 6-Channel in flight
Exceed RC G2 Raptor Brushless RC Helicopter 2.4Ghz 3D 6ch 6-Channel in flight
Exceed G2 Brushles 2.4Ghz 6ch 3D Helicopter Overview
Exceed G2 Brushles 2.4Ghz 6ch 3D Helicopter Overview

Did this video help you?

Benjie may-ag: the thing is no one in history ever showed how the fuk turn the helicopter on, by controller on camera. idk man im too dumb.

rocknthetube: Its nice to hear simple explanations for those learning on their own. I've been flying four channel for a while now and want to move on to bigger and better things. I wasn't sure if I could fly a 6 channel like a 4 until I watched this. Thanks a lot for posting this video. : )

TheBeatSmith: Ok...so I have been flying inside for months....I just got a DH9083 and it ok but I want to fly forward not go where the wind takes me....I consider myself an advance beginner seeking to move in the intermediate, no 3d flying yet just hovering, fast forward, figure 8's and some circuits........I want to know what heli would you guys suggest would be the next logical step.

casparams: Cool! Thanks for the information.

trunksss5: I can't even get mine to take off properly Drifts to the left and a very fast speek and i can't tune it out

Speed Demond: good video thanks

yamabushisama: thank god for you

10inja: good info.. throttle hold only cuts off the motor, throttle stick (which is used to change the pitch on the blades) and the other stick stay active.. it's only that the motor isn't driving or rotating the blades the blades would free rotate to allow you to land the helicopter, called auto rotation.

xhelicopter: I recommend you invest in a flight simulator before attempting any 3d maneuvers

TechBoyProductions: big waste of time

leebethell: My idle up switch must be stuck, ive tried loads of times to hit it in flight but my finger just cant seem to flick it over lol, its much more easier to swith over when the heli is turned off lol !!!!

xhelicopter: Tony's the man.

xhelicopter: That's what everyone is here for, to help each other out :)

jauchiu: Nice comment halmiller2.Nuttcaze doesn't know how to fly 3d.That is why X-heli hired Tony.

Hal Miller: you will get the same flight time wither in or out of idle up with the same flight pattern, rpm is not proportianal to amps. actually, since its a cheap ESC, you should get slightly longer flight times IN idle up as these escs are less efficient at lower throttle settings. also, if you are doing loops and stuff, you should take those flybar weights off, it makes bailing out a LOT quicker etc :P
Rating:
Exceed RC 2.4GHz TX 3D Helicopter Basic Tutorial 5 out of 5

Featured Video

How to Insulate Walls


Exceed RC 2.4GHz TX 3D Helicopter Basic Tutorial