jdmjtag: Wow could you have done that any more slowly and speak a little quieter???
Took long enough
MetalNekomata: Thanks! great help
John Doe: Do you have a part 2 to this video?
Did you remove center console to remove radio?
Ahhwhoaa: Thanks for the video! It was a huge help
Gogi H: This video was great! I am a 53 year old woman with no prior car repair
experience. And I was able to do it! Had to do this to replace a $10 part
in the gearshift. Thanks for putting up this video!
joelywii: Great video Bro could you send me the link to the finished installation.
Keep up the good work 😉
johnnymac1975: Your video and detail is amazing!
Quick question - I'm trying to drop the glove box on an 2006 300 touring
(not remove just drop to get something that fell behind.
How do I to disengage hinge hook that seems to hold it in the higher
position. (The hook is attached to a chord that looks like it can be taken
off the hook to lower but I can't do it)
Any suggestions from anyone would be greatly appreciated.
Jpkrao: Very instructive video. I'll use these instructions to access the "pink
thingy" of cheap plastic that broke in the shifter block of my 2005 300C
(less than 60K miles). Chrysler is made up of crooks.
Bill Clark: Thanks for taking the time to make this video. It helped me a lot!!
temptation2003: PM sent
Joecom Joecom: do yu have an INTAKE MANIFOLD TUNING VAVLE?
ernesto davila: Cool, would like to see a video of what you did and how it looks.
Roberto Rivera: A couple of the bulbs in my climate control unit under my radio on my 07
300c are not working, the dealer told me I have to buy a complete whole new
unit just because the bulbs are not working... is this true... or can I
replace the bulbs? Help pls. TY.
cj2style1: How do you remove the shifter knob???? I wanna change mine...
Javi y Pilar: Hi! I'm thinking on installing a GPS antitheft device. Do you know if
there's enough room on the radio CD for example? Thanks
temptation2003: @Yinhuwuduan check wikihow dot com search remove stuck cd
temptation2003: @MrJerry2722 Check out the following link for pictures to help u out... U
need a double din dash kit. PM sent with link.
sergeant64: There are special plastic tools for this kind of work, not adding scratches
to the dashboard.
a baqi: thank you add more video like this
temptation2003: @Digitech337 No problem, your welcome!
Yinhuwuduan: My CD player is broken , disk is stocked inside . Do you know any of home
way to fix this problem ? Or maybe just buy another radio and problem will
be fixed ?
krimz3n: @temptation2003 hey man, great vid... if you could please send me the link
also i would greatly appreciate it... thanxx a mill
4lifebmf: Hi Can you please send me link as well?
ernesto davila: Great video man, helped a lot. One question. Were you removing it to fix
the shifter latch device?
cj2style1: Yo ima true gear head and im planing on personaly customizing the interior
of my 300... THANKS FOR THE VIDEO BRO...GREAT
Wasim Abbas: Great video, it really helped!
alwaysreturnNurgirl: Great video
temptation2003: Maybe if the interiors are the same...?? Im not sure though cause I've
never taken one apart.
temptation2003: Nope, just to run some wire for neon lights.
edgar02: THX4the help nice
tezz777able: Thanx for the video and taking the time it was very helpful
midship162: Best video. This was very helpful and I was able to replace the broken part
in about an hour....Awesome Thanks...
Chrisfromlehigh: Thank you! I needed this to fix my shifter
Haroldbalsac: Thanks, this helped me alot
temptation2003: PM sent
Jeremy Booth: I have the same issue in my 07 300C, can you send me the info on that as
well? Thank you in advance.
MrJerry2722: good video bro it helped me alot u should make a 1 in how to make a custom
kit 2 cover the holes on the side when installing a double din
Mindless_Voters: Thanks for this, going to splice some wires to my cig lighter and console
dc so I can have hidden wires going to the dvr and gps.
Di Angelo: how to remove the ash tray form a 2010 Chrysler limited
Tiffany11692: My heater console lights stopped working do you know how to replace it.
Digitech337: Thanks for sharing. This helped alot!
temptation2003: nothing special just put a couple under the dash and under the seats. Helps
at night time to be able to see everything inside the car when driving.
temptation2003: Remove your contact block so I can send you a PM with the link on what to
Shank Montgomery: would these same steps apply to an 07 charger?
WhatYouSee: VERY helpful... I need to get my radio out to manually eject the 6 CDs that
are not ejecting... Hope I find a video on how to do THAT! Thanks!
bullitt1434: If your car is an '05 to early '07, you simply unscrew it. The new shifter
knob must have a thread size of 8MM X 1.25." I installed a Hurst T-Handle
in my '06 Charger SRT8. If your car is mid-'07 or newer, the shifter is
held on with a clip. I have no experience with those so I couldn't tell you
how to remove it.
DetonatorYellow: I am having the same problem as mr. Roberto Rivera... Can you assist me?
xlnickslx: my crazy ex girlfriend starting punching my dashboard and my hazard light
got pushed way back in there and the esp off button doesnt work anymore. is
this something i can fix myself? if not, is that expensive to be fixed at
LACE1050: Dear Temptation2003, Sir, thank you , this was a great video. Its amazing
what you can find now on line. Thank you I appreciate it. My problem is
similar to one of your previous comments. My climate control row under my
radio on my 2008 Chrysler 300 have all gone out. First it was the one on
the far right which is where climate dlow knob is and now my left went out
. I cant afford a repair bill of 200.00 for a 5 dollar light bulb . Any
help you could give me would be greatly appreciated.
Chrysler 300 Dash Bezel Removal and Center Console removal4.5
out of 5