Bill Carroll: Why did you say "Have any questions or comments leave them down below" when you don't answer any of them?
William Morrow: I have a 2001 ford Taurus that i rebuild motor because a blow head gasket now that is done. My transmission when put it in gears it jerks really bad and when i put my hand on the transmission oil pan to finding it is so hot that i have to take my hand off so what could the problem with the transmission. please write be me back too let me know what to do. thank yo so much.
P Gl: I have 0705 code only at P position.
OD blinking and no any other problem. so seems to me i have faulty range sensor.
Xavier Carrizales: is there a video of replacing the trunk key mechanism
Mario Cesar Luna Martinez: ESOS AUTOS SON UNA PORKERIA
sonyhicks: My car when put into gear keeps slamming and shifting hard I don't know what it is but it's breaking my mounts and is causing damage to other parts of the car I've taken it to multiple shops and no one seems to know what it is they always try to fix it the car seems better but within a few weeks the acts just the same as it did before again I put it in gear and the engine shakes at tugs and pulls you can hear it moving and you can fill it through the floorboard what is the problem
sonyhicks: What is this test called
sonyhicks: What is that test called? My car is having a problem I've taken it to multiple shops but no one can seem to fix it I am just wondering if they even thought of doing this test
Sunya Clark: I am having a problem with my reverse, I took it to a transmission shop and no codes came up at all, he put in reverse about 15 times and it was working fine for him lol, the other day it did the same thing, I don't have a clue what it could be, I need to sell it fast, I just got this car and people telling me that Taurus cars are junk and hated I got it, maybe I should go ahead and get my Buick fixed it needs a transmission smh
matthew s: i parked my 2001 ford taurus and now she won't go into gear....i hate to take it to a shop to have them tell me it's a rebuild job...does anyone know if it might be something simpler?...i was having no problems before parking it...thanks
George Navarro: aahh.... wish I saw this video before, I just ran in to a similar issue on a 1995 Windstar, it would not move when in reverse. Thanks for the help, please keep it up.
Thegovernor01: I am having the same problems with my 98 Taurus, Before spending a bunch of money taking it to a shop for them to tell me I need to rebuild my Transmission are these parts that I can change. If I then change them am I going to have an issue since I do not have the computer tools you have? Any info will help. Thanks....
Charles Fred: HOW MUCH DID THIS JOB COST
kr1180: My 2003 Ford taurus is doing the same thing, I was wondering if you ever got yours fixed and what the problem and costs were?
Torch TV: You should love the scope...all engine check with just a crank!
Petr Babuněk: I had this problems too. But mine was interminent clicking, loose power steering (looks like steering wheel lock itself for couple of seconds) ans radio only sound in PARK or NEUTRAL. Dont be scared, fix is no longer than 20 mins. DIY
Hiram Gutierrez: More than likely you are having an electrical issue with the reverse light circuit. It might be shorted to another circuit.Voltage is supplied by fuse #6 15AMP and it goes in to the TR sensor on the orange wire and it goes out to your back up lamps from the black and pink wire.Also note that the same wire that goes to the back up lamps also goes to the RAP module behind the integrated control panel.I would disconnect the RAP module first to see if the problem goes away.If ok,RAP module shorted.
Daniel M.: but when im driving I hear clicking sometimes back to back and when it clicks I lose power steering power and radio and windows,,then sometimes it will click back, then everthings back but not for long,, any idea,, think my PCM might be the problem,, does that lil rod with the threads that comes out of the transmission that the auctual sensor is bolted to,, could it be it, Im just stumped but I have aleast pimpointed the issu !!! Dan
Daniel M.: hi,,love video,, lota numbers dont quite understand,, but I got a 96 mercury sable, same set up and I changed my transmission range sensor, and figured out its not it but is in the part where it hooks on,, with the range sensor installed, I have pull lever thats attached to the acutual sensor all the way to the left and my power for the radio and windows all works,, but after i re attach the shifting arm,, and go through gears it wont spring back all the way to get the power back,,
Hiram Gutierrez: Its an Autel DS708 from MaxiDas.
2000 Ford Taurus TR Sensor Problem P0705, P1702 - Transmission Repair5
out of 5