Gunsmithing: High Standard Dura-Matic .22 Rimfire (Gunworks)




People Who Liked This Video Also Liked

Gunsmithing School: Student Interview/Review #5
Gunsmithing School: Student Interview/Review #5
Product Review: Grizzly 4003G metal gunsmith lathe
Product Review: Grizzly 4003G metal gunsmith lathe
Gunsmithing School: Student Phone Interview/Review #2
Gunsmithing School: Student Phone Interview/Review #2
Gunsmithing School: Student Phone Interview/Review #1
Gunsmithing School: Student Phone Interview/Review #1
Gunsmithing School: Student Interview/Review #6
Gunsmithing School: Student Interview/Review #6

Did this video help you?

bigjohn22: How do u remove the extractor from the slide

Janet L.: Great video! I just bought one of these. Gave it a basic cleaning but there was some stubborn gook in the slide channels, etc. I put 20 rounds through it today and it shoots like a dream. Now I want to really strip it down and give it a go with some serious solvent. Any recommendations on what I should use?

Johnny Nawatani: I think my ejector flew out how do I replace it what hold$ it together

Johnny Nawatani: I think my ejector flew out how do I replace it what hold$ it together

Walter B: Great video. But wish camera was closer and light a little brighter. But thoroughly enjoyed your audio presentation. Will keep watching.

Lee Fowble: I have number if High-Standards, and the Duramatic is one of my favorites. I got a super deal on at a gun shop/pawn shop because they couldn't get it to function. I saw that it had the wrong type of H-S magazine in it. I gave them $90 , put the correct magazine it, and now have a pristine gun in 90% condition. I especially like the H-S revolvers. I have J.C. HIggins .22 that was actually made by H-S, and it very accurate gun.

John Gregory: I have a HS duramatic. How would I decrease the trigger pull?
Thanks

John Gregory: Video was great but I wish the camera was tighter on the parts. I couldn't see which pin you took out first. Light could have been brighter

OLD WIPPER-SNAPPER: THANKS FOR WD-40 BASH . HAVE BEEN TELLING PEOPLE FOR YEARS , ABOUT IT !

Mike Eastman: Hey I have this pistol and I need to dissasembl the mag any advice?


Joe Guzman: There are a lot of these guns for sale, if they took it apart and don't know what they're doing it's damaged. 

J Martin: Still looking for an old High Standard Pistol....but NOT that one... I prefer the GB.

Travis Oughton: I got one of these dra-matic .22, I rarely use her but the shells seem to get caught in a 45 degree angle and jams. The gun is in mint condition and very clean. It is probably the rounds, is their any recommended shell you have in mind for this gun. Thanks 

Alex Hughes: how much do you get to make the trigger work again on a late model m-101 plinker?  The trigger will not reset.  

downeastgunworks: Srbija575.... If given a choice - go with the Colt... Or the High Standard. - yes I'm biased towards the older classics. They're classic for a reason..... Just saying.

SHANE JOYCE: I have a high standard duramatic that won't eject the shell after being fired. What should I try replacing?

bob jones: Hey Jim. I've owned a HS Trophymatic in the 80s and was the most accurate gun I've ever shot but they closed shop in Hamden and went to Texas. I once purchased a high standard about three years ago and it shot very bad. I saw one the other day that was made in Hamden Conn.. What should I look for before I buy this gun to possibly help me be assured that's it's accurate? They want 699 for it and that's a big chance to buy this gun because once I do it's mine. Thank you.

Jeff Galpin: Hey do you know if the trigger pin is a taper pin? I have one to fix for my father in law and I can not get that pin out, the trigger is very stiff so I am worried someone drove a pin into it that didn't belong.

Gui Farid: great video....
Rating:
Gunsmithing: High Standard Dura-Matic .22 Rimfire (Gunworks) 5 out of 5

Featured Video

How to Insulate Walls


Gunsmithing: High Standard Dura-Matic .22 Rimfire (Gunworks)