Building A Les Paul LP Guitar Neck For A 59 Paulie Luthier Jigs Templates




People Who Liked This Video Also Liked

Building a Les Paul LP Guitar Neck for a 59 Paulie Luthier Jigs Templates
Building a Les Paul LP Guitar Neck for a 59 Paulie Luthier Jigs Templates
Inside the Luthier's Shop: Making Les Paul or Gibson Guitar necks jigs custom
Inside the Luthier's Shop: Making Les Paul or Gibson Guitar necks jigs custom
Building a Les Paul Guitar body Luthier building process 59 copy
Building a Les Paul Guitar body Luthier building process 59 copy
Luthier cutting a perfect les paul neck tenon for your custom guitar project jig template luthier
Luthier cutting a perfect les paul neck tenon for your custom guitar project jig template luthier
Les paul guitar neck jigs luthier builder templates for custom project
Les paul guitar neck jigs luthier builder templates for custom project

Did this video help you?

Hot Potatoes: Please build me a custom Les Paul!!! ha!

mojojo10000: do you still make these bodies and necks if so love for you to build me a set

FightFan5: you might think people are trying to help by posting links but dont overlook the fact that your videos get alot of views so they are also kind of advertising on your back

Douglas S: Hi. Do you have any video showing how to shape/carve a LP neck profile? Thx a lot for the great videos!!!

SuperCarver2011: Great demo. I have made 3 LP types myself, so it's interesting to see how other
woodworkers do it. One thing I noticed is that your fingers are pretty close to the saw
blades...good thing that you have good concentration and eye to hand co-ordination.

Paul Bohn: If your cutting a strait truss rod slot, it's way easier to do on the tablesaw.

Misfit1026: Grizzly.com is your friend. I know you probably like your router table just fine, but, check out this shaper, it is a great shaper for the money and it is a world of difference versus a router table. I make furniture. I use one of these daily. It has lasted me 5 years of daily use and shows no signs of wear or any issues. If you can pay for a Laguna Bandsaw, this is well within your budget! Just tryin to throw some info your way. I used to use a Router table and it was so under powered and the collet chuck had limitations of size. Shaper cutters last soooo much longer! Anyway, here's a link. Also, back up and look at other shapers if you want to pay less or want nicer.

http://www.grizzly.com/products/3-HP-Shaper/G1026

Matthew Wiebe: what are the clamps you use for the jigs called?

Ted Lundquist: Great videos! Thank you for all info! :)

Finn Von Schmedling: Hey man! Been watching your videos for about a year now and I really love your work.
And I wonder if you sell only necks? Have a 72 Gibson sg with A neck beyond repair. So. I need a new one.
Would you take the job? 

leon james: I'm in the UK and would buy a les paul kit off you over a Gibson any day,do you sell to the UK? 

Jerry Lake: Question for you Sir. I have seen several videos of people making guitars even the factory made units and all of the ones I have seen done you use two pieces of wood to make wings on the sides of the tuning head. Why? Why isn't this just made out of a solid chunk of wood instead of adding these two little wings and then routering them off?

Billy Shelton: Pm me on the price of your 59 lp necks 

Billy Shelton: Why don't you sell a 59 lp diy kit.i can't seem to find one that's close to yours,I'm trying to build one like the derrig copy that slash has.

James Funicello: Your router bit is too short. I have several similar applications. I was able to get a 1/2 inch by 4 inch tall straight cut  bit for like $26.00. It saves so much time from resetting bit height and taking multiple passes. There's a bunch of sites you can get a custom one from. I think I used tool orbit or orbit tool. Nice vids man. Keep on rockin.

vinnie dolly: 0:01 are  those one-piece necks or do the headstocks be derived from another chunk and  sticked onto after subsequently?
18:28 what a perfection bro! in future i think i'll want to ask you to build a LP to me

arthur kandziora: Do u sell any of the guitars u make?

Nick Bretz: I saw in your other video that you routed the neck pocket at a 4.5 degree angle. Do you put another angle on the neck?

Сергей Скорняков: Клееная башка грифа!!! Оригинально, такой хрени я ещё не видел.

Za7a7aZ: Did you study how to become a luthier somewhere or did you teach yourself?
Rating:
Building a Les Paul LP Guitar Neck for a 59 Paulie Luthier Jigs Templates 5 out of 5

Featured Video

How to Insulate Walls


Building a Les Paul LP Guitar Neck for a 59 Paulie Luthier Jigs Templates