Chay Williams: why cut in the middle and not the corner? looks like you're wasting loads
of acrylic. otherwise nice ;)
SnipeMeNot: Would you sell one of those?
diego colon: Nice dude! Question. Did your temps increase or no after removing stock
Steven Blohm: what front fans are oyu using that looks sick and id love to do the same
thing when my corsair c70 case comes thanks
Kostas Mavroidis: what paint did you use? color and brand?
ItsEpicDanny: So freaking sick. I decided to get it soon and do the same mod. Thanks so
much for the video!
Ej R: Liked, for the sake of clear side panel windows!
AtheosTheAtheist: If i may ask it looks like the original plexi window had raised tubes that
the screws but against, is this not the case or were you just able to screw
the screws in deep enough to remove any rattle?
craig855s: Do your front fans make an awful noise sucking through the filter/bezel.
Ive just put 2 sickleflows in my c70 and with the bezel on they sound
awful, if i remove the filter its a different kind of awful (just sucking
through the big circular holes) and if i have the whole bezel off theyre
silent, im wondering if it's a design flaw that the airflow through the
bezel and filter causes the noise?
darinz1: Hi.I Have this same case on the way and was not keen on the vents either so
I am going to do this mod.What thickness was the plastic that you
Warren L: I have neither the tools nor the skill to do this mate. Fancy whipping me
up a window? I currently reside in Ireland. I will pay for the plastic, the
shipping and your time in advance on paypal. Give me a price bud.
Twowheeler2005: Really looks great....Good job....I will do the glass mod when I get
Pandawatch: Sexy setup and mod. Great job!
Phill Murray: I don't see how the window not being square makes a difference... If you
rotate a rectangle by 180 it's still the same position??? Only thing I can
think of is if the screws are in different positions. Am I right?
Ryan McCord: Does the thickness of the acrylic matter when fixing it to the side panel
PCaddict365: I have 2 more under front bezel
Wanted Ghost: You cant i tryed the case windows isnt square it look like it but not i
tryed but i might mistaken but am 70% sure you cant
1814Custom: I saw this a couple of weeks ago..... today i made my "mod"... I didnt
route the glas like you did, but it came out nice i think. Used 6 mm (1/2")
clear rubber hose, cut to 4 mm lenght and used as spacers/washer since i
only used a 4mm plexy glas.. thanks for sharing PCaddict365 :)
zoidberg: Could you flip it so the fan holes are on other side
DaBoss720: this would be so sick with red led's
sdmf74: got a green one on the way, you should make a template and mass produce
those, Ill buy one too. good job!
lilturk726: Thanks, I have just the two under the bezel and am having trouble with
airflow, because as you know the front is kind of restricted, so I'm either
going to ad two more fans to the cage or switch over to some Corsair
SP120's, probably the latter.
MrSindreee: what build is that? look pretty high end from the window
Alexander Angelkovski: I would have mounted 2 air intake Led fans on the side panel instead and
used 2x120mm Akasan Aluminum Fan filters over it. That would have given a
cool effect on it, and btw i really don't agree with the 2x 120mm blue led
fans that pull the air from over the hdd bays, I would have had those
completely black, cuz they are somewhat annoyingly bright. I am gonna get
me that case though, it's way to awesome. gonna get me the military green
one and mod it up =)
MorbidAfliction: What are the components you are using
MrHusain5253: you could have also just rotated the grilled hole part towards the right
PCaddict365: 2006 Yamaha R1, you can see HD video of it on my other channel
PCaddict365: Didn't have a tape measure handy but a piece 17"by 17" would be big enough
Terry Dalton: Nice work, looks much cleaner. I really like it! Not knocking your skills
at all, but having the proper tools ie router & table and all sure make
things easier. Be next to impossible to recess the egde of the plexi-glass
without it. Unless you made a jig. Anyway good work, sounds
j3fflikesmusick: Looks a lot better
MrB13boy: how would u charge to make 1 for me? or better yet make 50 of them and sell
them on ebay. i love this case but that window is just fugly.
OwtDaftUK: Since i dont have the ability to do the window maybe i should try turning
the wndows so the holes are on the other side.
Adn44an: The black and blue theme looks cool.
mintchipster: It would also make the sales go up since 99% of the people hate the holes.
lars38010: Nice mod. But i am very bad with saws and other stuff :(
LampOfMagic: thanks man for the upload that case looks sick and bombproof
Fatpepperbear: How much do I pay you to make one for me?
lars38010: You need to show this mod to corsair :O
Marseth Moonpaw: did you get the acrylic online or local?
LivelysReport: I think you did a great job... but I am wondering... if you just pulled out
the old piece and turned it 180 so the fans would be at the front of the
case instead of the back of the case... it would blow more on your hard
drives and leave open a view of your cpu and graphics cards... and would
still probably blow good air around the rear side of the graphics cards...
Brian Walker: I got the Gun Metal Black, the puke green is nasty !
NobleTechGaming: great job looks factory! Could have just rotated the window but this is the
proper way and turned out awesome.
Chris Caliente: PCaddict365, you did a very good job replacing the fan window with your
modified clear window, it looks 100% better. I would like to replace the
window on my Corsair 300r with a clear plexiglass, but my Corsair windows
don't have screw holes, they made it even harder to replace the glass. Go
to my channel and check out my build, leave feedback.
sayhai: what fan do you use for the front intake??
Bradlee Eiler: Really looks great bro. I'm using this case for my build and will no doubt
ausgebombt: looks like you could take the panel off, tilt it so the fan holes could be
down and horizontal and then put it back together, thus clearing the upper
view and retaining the fan option... could it be done with this case?
also.. the build sounds pretty loud, what after market fans did you get?
(im looking forward to getting this case myself)
mintchipster: Corsair should just not drill the holes! haha it would actually save some
money on the electrical bill.
Syrix100: What I did was just flip it so the fan mounts are on the other side. I was
originally going to put them at the bottom but it's not the same length so
it wouldn't work.
OfficialMaity: Can you give the height and length you cut the plexi glass?