GE Electric Range/Stove Large Surface Element Switch #WB24T10027




People Who Liked This Video Also Liked

Range & Stove Repair - Burners are off & light staying on -GE. Hotpoint. RCA. - JSP46SP1SS
Range & Stove Repair - Burners are off & light staying on -GE. Hotpoint. RCA. - JSP46SP1SS
Surface Element Won’t Turn Off — Range Troubleshooting
Surface Element Won’t Turn Off — Range Troubleshooting
Range Small Surface Element Switch (part #316436000) - How To Replace
Range Small Surface Element Switch (part #316436000) - How To Replace
Top Burner Receptacle Kit (part #330031 and others)-How To Replace
Top Burner Receptacle Kit (part #330031 and others)-How To Replace
GE Electric Stove Disassembly (Model #JBP66COH2CC)/Repair Help
GE Electric Stove Disassembly (Model #JBP66COH2CC)/Repair Help

Did this video help you?

Marcus Williams: Thank you so much for this. I kid you not, I've been dealing with this issue for 3 months not having any idea what it could be. My eating has drastically changed due to this problem. I'd be cooking food on number 3 and it would turn what should be mushy peas soup into a burned disgusting liquid. Overcooks my ground beef every time, kills my chickens legs. This problem drove me crazy to the point that I went to the doctor's because I thought I was having stomach and appetite issues, when really my food is just gross cause it's getting destroyed by my faulty stove. I'm not crazy afterall 😀

nathaniel padilla: I just had an incident where I was making food in a pan and literally was burning the food I had it on 5 there's no way it should do that how do I fix it??

John Mooney: If I have four burners and the burner on light isn't going off, how do I know which one of the burners is the problem? Is the switch the same for each burner no matter the size? This is a Hotpoint, which I believe is GE.

Jo dy: Of course we have to unscrew the plate to replace it! What I need to know is where each stupid wire goes!

Jay Lew: Finding this video saved me from buying a new stove! Super easy fix!

jludtxs: my GE electric stove chassis has started shocking me when 1 of the burners is turned more than half way. It is only that one burner. Where should I start looking for the cause?

marinesnip: If the burner starts up normally and then goes to HIGH and stays there until you turn the switch off, would this issue still be the cause of a faulty Infinite switch? It seems to go and stays on High after going past number 4 on the dial. Thanks!!

telosfd: I like the simplicity of the switches!!!!!!!!
Rating:
GE Electric Range/Stove Large Surface Element Switch #WB24T10027 5 out of 5

Featured Video

How to Insulate Walls


GE Electric Range/Stove Large Surface Element Switch #WB24T10027