John Deere 3032e First Review 76hrs




People Who Liked This Video Also Liked

John Deere 3032e first review 76hrs
John Deere 3032e first review 76hrs
John Deere 3032E VS. Kubota L3301
John Deere 3032E VS. Kubota L3301
Review #2 of John Deere 3032e 170hrs+
Review #2 of John Deere 3032e 170hrs+
John Deere 3036e Compact Tractor - Part 1 Review and Mods
John Deere 3036e Compact Tractor - Part 1 Review and Mods
John Deere 3E Series vs. Kubota L Compact Utility Tractors
John Deere 3E Series vs. Kubota L Compact Utility Tractors

Did this video help you?

omgnothingisavl: Thanks for the review, im looking at the 3038e so this was helpful.

daveknowshow: nice tractor! my insurance agent just bought one last month. I know he will enjoy it.

jess taylor: I have this for 5 years.. been a good one.. plenty of power, fast.. run circles around Kubota my nefew has.. use it every day...replace one front bearing because fan belt broke and went around the shaft.. other then that been great..

fdxman74: It's a great machine. It's not the fastest machine but it's tough as hell.

Sidney Mathious: I just purchased a John Deere 3032E tractor and hope it turns out to be as good as my John Deere 790 tractor which I love. I got it new also and use it now with the brush hog on the rear, and the new one will be using the other implements attached to it, starting with my box blade.

Eaddie Hall: What's the biggest disc and finishing mower can it pull?

Paul Mitchell: I have one and it has 90 hours and I love it. I cleared an over grown field 5 acres plus in size. I have a Woods R5 mower and using the front bucket to push the trees down the mower chopped up whatever the tractor could push down. Great tractor!

Kris P: time for part 2 review!

ROBIN HOOD: I have one with almost 1000 hrs on it. When I purchased it I had a problem with it lifting and kinda jerking this was within the first months of ownership. I had john deere pick it up and check it out, they brought it back saying it was ok, So it was up to me to find out the problem. I pulled the Hydro filters off and learned there was metal flakes in them, I guess break in period type stuff. I replaced them and its been ok but I am still worried that one day I might find out what that was all about. I rarely ever go past 15 on the rpm because of that. The other problems I have was the steel rod that holds the lift arm on the back broke twice. I finally put on a shaft that was a bit smaller but better steel, no problem with it since. The other thing I had was the 3 point where the upper arm attaches to the tractor has broke many times, First time was with a snow blade, But other then that It has done a lot of work for me. I purchased mine in 2012.

Sheldon Coder: my issue was the loader was not powerful enough, exchange for a 3033r.

J Bowman: I've. Got a 3030e it's outstanding!! I'm with you I think they underestimate what it can handle... in 4wd it will push a mountain of debris. I keep the regen on auto and haven't had to run manual regen. You might try that... I also run it up high RPM which they say is best... mine just put the burner on and took soot level from 77 down to teens like you said and kept on working! Love this thing especially the quick attach which I use to carry chain when I'm not using attachments.. 42 hours on mine, I'm right behind you I use loader a ton and also the drawbar to drag trees n logs around big 20' hardwood ones too

oldhawkins: I have a 3032e on 34hrs.  I'm noticing an intermittent  loud squeak coming from my left front wheel in 2 wheel drive. I checked the front axle oil and it was a little low, just touching the bottom of the dipstick. Hope it isn't a wheel bearing problem.

SunSouth John Deere: Thank you for your business!

Plowboy228: If your in the market I am DANIEL HART (the salesman) at SUNSOUTH John Deere dealership in Lucedale, Ms!Come see me or give me a shout601-947-4500(Dealership phone #)
AND THANK YOU THOMAS O'BRYANT for the review video and recognition! It means a whole lot to me as your salesman and the company! Thank you my friend!Thanks for your business!

Deacon: To adjust your hydrolic speed, sit in the seat to the right rear of the seat is a "T" handle. Turn it to make the adjustment you want. It's black and hard to see sometimes.

Justus DeBoer: I'm thinking about buying one, thanks for the review!
Rating:
John Deere 3032e first review 76hrs 5 out of 5

Featured Video

How to Insulate Walls


John Deere 3032e first review 76hrs