New OFM Jumper 600 Low Cost And Powerful DIY FPV Quadcopter




People Who Liked This Video Also Liked

New OFM Jumper 600 Low Cost and Powerful DIY FPV Quadcopter
New OFM Jumper 600 Low Cost and Powerful DIY FPV Quadcopter
FPV of your Dreams -- The Road with OFM Jumper 600
FPV of your Dreams -- The Road with OFM Jumper 600
AlienX Low Cost FPV Quadcopter Part One
AlienX Low Cost FPV Quadcopter Part One
OFM Jumper 600 Testing 14.8v battery -- Ground Cam
OFM Jumper 600 Testing 14.8v battery -- Ground Cam
HT-FPV NAZA Quadcopter Build Configuration
HT-FPV NAZA Quadcopter Build Configuration
Cheap. Easy Quadcopter Build
Cheap. Easy Quadcopter Build
K450 Quadcopter build Tutorial RC Legends
K450 Quadcopter build Tutorial RC Legends
How to assemble OFM Reptile 650 Quadcopter Part 1
How to assemble OFM Reptile 650 Quadcopter Part 1
New OFM Hunter 700 Long Range Quadcopter
New OFM Hunter 700 Long Range Quadcopter
Building a Cheap Quadcopter At Home (1)  - Lift Off
Building a Cheap Quadcopter At Home (1) - Lift Off
101kmph Quadcopter Long Fast and Low Altitude FPV Adventure
101kmph Quadcopter Long Fast and Low Altitude FPV Adventure
A DIY Quadcopter - Assembly - simple. cheap and easy.
A DIY Quadcopter - Assembly - simple. cheap and easy.
RFTC: A Beginner's Guide to Building and Flying an FPV Quadcopter (2012)
RFTC: A Beginner's Guide to Building and Flying an FPV Quadcopter (2012)
Cheapest Super Light Quadcopter Frame $5 & 180 grams - Multirotor
Cheapest Super Light Quadcopter Frame $5 & 180 grams - Multirotor
Reptile V550 Quad FPV Build Tour
Reptile V550 Quad FPV Build Tour
Introducing OFM Reptile 650 Quadcopter for FPV
Introducing OFM Reptile 650 Quadcopter for FPV
OFM-450 Quadcopter -- Fast and Low FPV
OFM-450 Quadcopter -- Fast and Low FPV
Scratch Built FPV Arachnid Quadcopter River Side Dash
Scratch Built FPV Arachnid Quadcopter River Side Dash
Mini FPV Quadcopter - Walkera QR Ladybird 2 unboxing Review
Mini FPV Quadcopter - Walkera QR Ladybird 2 unboxing Review
5.7km FPV Flight on OFM Reptile 650 Quadcopter Normal Version
5.7km FPV Flight on OFM Reptile 650 Quadcopter Normal Version
WWW.RTF-HELI.COM - WALKERA QR-X350 G.P.S. QUADCOPTER REVIEW
WWW.RTF-HELI.COM - WALKERA QR-X350 G.P.S. QUADCOPTER REVIEW
How to build the awesome kk2.0 - 2.1 quadcopter by RCTV-UK
How to build the awesome kk2.0 - 2.1 quadcopter by RCTV-UK
Epic FPV rescue of a quadcopter
Epic FPV rescue of a quadcopter
Exploding Quadcopter and Foxtech HoryzonHD FPV V3 Camera Review / Turnigy 9XR / RMILEC UHF
Exploding Quadcopter and Foxtech HoryzonHD FPV V3 Camera Review / Turnigy 9XR / RMILEC UHF
Quick look at my current quadcopter and fpv setup
Quick look at my current quadcopter and fpv setup
New Walkera QR W100s Quadcopter with FPV and Wifi Review
New Walkera QR W100s Quadcopter with FPV and Wifi Review

Did this video help you?

Spirit Greywolf: Nice job! My only suggestion is that it would be nice if in the description you listed things that are most commonly asked about the buildout - such as what motors/ESC's are you using, what battery are you running (3S? 4S? Amperage?) what camera, downlink, receiver are you using for the FPV? Or - is it an FPV or is it just a record on chip/cam like GoPro and you download it - which means we see no static in the vid, etc. Small details like this would make me consider actually buying from someone providing the data - as it is, just kinda looks like a promo with some thump-music. None of the links supplied actually gets you any info for this particular video. Thanks for reading!

John Simian: I love these drone videos

Justa Dude: Excellent production. Some one needs to invent an alternator, just like a car would use, but super small to keep the batteries charged. It just sucks that batteries don't last long,..What are the best batteries on the market and what should we look for when buying them?

Aalin Javad: . 

Dylan Matsuoka: Can I have the ofm with a controler and the battery's and so on so basically the hole set up for free please I will never be Abel to afford one of these 😭😩😩

jason basquez: Are these kits still available?

David87965: Still using naza... why would you ever use that. APM (non-clone) is where its at.

Chad Bennett Sr.: Great work as usual, Ali. Those that talk about prices being too expensive must have never tried building their own Quad of the same size and equipment from scratch. I have built three so far, with countless rebuilds after crashes and such. Not an easy thing to do considering yours come perfectly tuned, and ready to fly with minimal assembly required. Tuning PID's, setting up GPS, balancing weight, balancing props, assembling frames, all takes time, and that time equates into LABOR charges. So, you people can take your money and buy a Phantom that's a pain in the ass to fix if broken (try changing a whole frame just because you broke an arm) or buy a CUSTOM built finely tuned machine from an expert and have something you can fix easily yourself WHEN, not IF you crash it. LOL.

Micro Quads: is it really safe to use a swollen lipo battery? I have some 2700 Mah but I am afraid to use them 'coz some say it might explode. can anyone share their 2 cents pls.

нышанали тургунбаев: Ну Алиша классные твои видики но комментарий мне не по душе , ты лучше обясни мне по Кыргызски..

Reg Williams: very nice

lk1dare: I like the design, keep it up!! there are always opinions, to bad some people have to speak so aggressive. Good luck to all in the hobby>

ELLibre007: 5000$ Low cost?????????????????

bullsballs: When you lifted, rotated and came into view, I heard the words from an old video game, BERZERK, in my mind, 'THE HUMANOID MUST BE DESTROYED...', then the fun began! Awesome video, keep up the good works!

jimmy corncracker: Music ruins the video.

GasserGlass: HOW MUCH?

Ian Huxstep: I have one of these, how did you minimise your jello effect, what camera set up are you using?

BrainToMush: So cool, man!

SRHooM: yeah nice for 5k..

jon doe: I have tried the product links in 2 of your videos and i have got "product not found" in both of them. Is this product and the 480 (cheap fpv quad) discontinued? Thanks

Eric White: How much flight time are you getting and how much does this unit cost? 

KitCox: Where was this demo made? Thanks.

Hank Hasemeier: OK what camera are you using and what live streaming device are you using too 

Dio Sciaroni: if i only had a 3d printer,,i would turn my mini hubsan into a mini jumper,,the legs look amazing

SupaNautica: Alishanmao, which quad copter in your range is comparable to DJI550?

Matt Razorback: What were the motors you used?

Vamar Anthus: I think I might try the low cost Ferrari too, since we are talking pennies here....*cough* seriously, unless you are the 1%, how can you call $1,200 'Low Cost'....if this quad weren't so flippin cool I would be ranting about you wasting my time with a badly wrong titled video...but, im so confused, do i like you or hate you?

Graham Woods: awesome quad great video quality and it handles beautifuly but I would not classify this in the low cost DIY quad category I found that a little misleading, but I still enjoyed the video!

RhetoricalQuestion: This is amazing.

IYEAMXT AsnnonnYeXT: shoot me a price i really want it dont have much time to make it myself

Jason Gadrim: Love this video, Good Job

philippe fontaneau: Like that Keep going ahead Phil

boashna: somebody is getting roostery by going too far and zig zaging between trees .. good flying

Dog Bone: legs are same as the 525

Chile Vuela: Looks like the x525 frame frome HobbyKing. It's a nice sturdy frame and parts are available pretty cheaply from HK. Mine has survived some pretty nasty crashes so far...

Pk Spence: Love dem breakz!

bitmaxim: Nice and smooth terrain following!

philippe fontaneau: Like that Keep going ahead Phil

DaddyIsaCameraman: those three little words that mean so much.......I WANT ONE. Thank you for posting. One day I will get something better than my little x200

tuxnor: bird was hiding because of unreal flying...spetakular good vid :)

Ari R: Hey what's the name of the 2 songs played at the end of the video ?

evelasq1: I saw the price for 1800 dollars. I would rather build my own for less than that price. I may want to try to setup a tricopter for around $400. I know where to get the parts. Peace, Flood!

EnderEgg: what's that thing to see with fpv? I mean the glasses or something

Вадим Прокофьев: very good \\\ очень неплохо

Sebastian Mort: Nice video Ali. I doing a demo for some Americans here in Australia this week. I'm working with a guy (Professor) and he has a $15,000 Au grant to buy a UAV. I have recommended he contacts you Ali to talk about a sale from your company! We need to talk.........……:-) Seb

Jay May: Is it in Saudi Arabia? 

Shawn Barney: Very nice video I can't wait to get to that level.

Thomas Lewis: what I find is their is a big difference in the quality of motors,you get what you pay for.

brett dilcuia: how long can that thing stay in the air and how far can it go..

Jay May: From where can i buy this thing and what is the price of it? I really like your videos and what's your nationality? Actually i am Pakistani 
Rating:
New OFM Jumper 600 Low Cost and Powerful DIY FPV Quadcopter 4.8 out of 5

Featured Video

How to Insulate Walls


New OFM Jumper 600 Low Cost and Powerful DIY FPV Quadcopter