t00nz843z: Elisabeth, no it's not normal. A single reinstall may be needed to correct
a minor bug in the program that sometime states "There are no items to
show" when trying to export your project. But after the reinstall, that
bug should not appear again with that version of the program. However, it
might appear once after a full update of the program. But reinstalling
should again correct the issue until the next update.
Justin Howell: This was amazingly helpful, thank you.
MurrowSon: A lot of lag time on my building attempts on it so far, but your video
seems to do a good job showing the setup. nice job, esp. for getting this
out there for people to use. I was looking at new software for just a few
extra features I wanted.
TRiLLSHTONLY: I made a very successful video with this sometime last week, i worked with
barely any problems. You could check it out in my channel to see. But
tonight im trying to work on something to release tomorow. And everytime i
preview it keeps skipping or buffering, i cant work!
please is it my laptop? It usually did it with my fan on or when laptop got
too hot. but neither is happening. and it keeps doing it! help please
Elizabeth Fannin: How do you upload it??? It saves the project at a VPROJ and no video player
anything knows what that is, how do you convert it to an avi or something
watchable?? My computer thinks it's a document not a video! HELP!
bluerose600: how can I splice a scene without deleting either part. I am trying to
rearrange a scene to put the first half in the beginning and the other half
at the end. But whenever I cut the scene, the selected part gets deleted.
Elisabeth Reed: is it normal to "install" this program everytime you use it?
ahmad abdaldayem: +t00nz843z Since the last update it sucks!!
The older version was easier and even building project was peace of cake,
but after the update there is export project,when i click it after all my
work is done i press export project it says: no items selected .......
can you help? if you cant can you gimme link to older version????
James Rivera: Great video! Thanks for the help.
mihkel aaremae: i thougt taht is impossible to find a one like this thx man
DIMITRIS RODIS: does anyone know how to rotate a video?because the videos I import from my
mobile they all need rotating
Ivan Hoo: hi there..how do i speed up the video?..can i do timelaspe using VSDC?
koolgool: I'm sorta lost in this thing right now. Is there no way to preview the
video while you're editing it?
Jirawat Phonthajak: Thanks!!
umar peerbux: good video
TheThewonderman: can you help me im trying to work out how to change the audio level on some
music im trying to use but i click on volume in the editor drop box it
doesn't give me anything to change the level with so is there any other way
to change it useing vsdc , as i dont realy want to have to use a audio
program to do this
warmblackstar: my video is there but i go to export it and it does not automatically show
up and when i choose it for exporting, it says the parameters are
incorrect. i'm so frustrated and confused! everything looks fine until i
try to export it!!
Mikex0123: I'd like to know if you can do a simple edit without converting the file. I
just want to remove portions of a file and save the rest without converting
it to the same format it is already in (mkv).
BillyWithaKGaming: im trying to add music to my gameplay but i cant seem to figure out how and
also, how do you preview the video you are making in the actual editor? if
someone could respond to me that would be great
Na P: Anybody out there know how to get start/end points to take? :) I do what
the video above says to do in order to cut 11 minutes from the end. My file
claims it's cut from 22:00 to 11:00 as desired. But when I go to export,
the estimation says it's back up to 22:00 and the final video is indeed
22:00--just has 11 minutes of blank black at the end instead of the VHS
fuzz I cut out.
Jedidja van't Hof: Is it possible to rotate videos with this software?
NintendoLuigiMario: I don't know what I'm doing wrong, but sometimes the Export Project
function won't actually export the project file and the window just says,
"There are no items to show." What exactly does this mean?
Douglas Reyes: hi
Jason Williams: I can't access cutting from the properties window. Ugh.
Robyn Anderson: Hello. You're videos helped me to edit a 30 minute video. I was almost
done with editing when the program began to crash. I responded by saving
more often. But now it is crashing every time I try to preview the scene,
add a video clip, or build the project (and that's if the program even
opens at all). I don't understand what the issue is. I was running my
video from a 500 GB hard drive to eliminate the RAM issue, but it won't
work off of my desktop either. I've also tried restarting my computer and
reinstalling the program. Should I just scratch this project and start over
in a more capable program? I've already spent about 20 hrs editing, so I'd
like to revive this project if possible. Thanks in advance for any help
you can provide.
SithGamingSquad: I'm currently having a problem where I export the project, and all the
audio from the video clips have been removed and now all i get is a loud,
static-y sound. The individual files are fine, this is only happening when
I try to export it as a video file. Any solution?
EndroProductions: when I export the video it has black borders on the side, but not when i am
editing it. How can i remove those?
Peter Larsson: I cant get the audio effects to work, i tried with both mp3 and WAV. This
is the only function that don't seem to work. The volume setting in the
property window works though. Any Thoughts?
t00nz843z: Please watch the video at 0:15 joseph antony: how to rotate a vedio
websterdrums: Thanks, the video is very helpful!
t00nz843z: There's likely a time gap between some of your pictures. In tha baove video
at 2:05 notice that there are no gaps between the individual clips (or
photos) on the timeline. To make sure that there's no gaps. hold down the
shift key and click on each block in the timeline to highlight them. The
notice the little purple icons in the lower-right corner of your preview
screen. Move your cursor over the second icon from the right (Set blocks
order) and click on it. That should fix the problem.
Shanbo26: Ok, I've done the cutting and splicing, but when I hit "Build Project',
NOTHING's THERE!! How do i save to an actual file?
Shanbo26: Here's an idea. MAKE A MANUAL!!!!
t00nz843z: It could be a bug in the preview window. Try making the final video (Export
Project) to see if the problem persists.
Sara Naftaly: Problem: I've managed to make a couple of slideshows with music that came
out very well. I just made a new one but when I run the previewer the music
plays but there's no video. (When I put the cursor over the picture the
regular editing window shows the right picture). What could be the problem?
Thanks in advance...
Shanbo26: Yeah, you know what would be really good? A MANUAL!!!!
somegirl62: I have a question. So you know where view is, and there are things that say
"Projects explorer", and "Editing Tools" Well I had them all out while
editing a video, and I moved them around. So now they are in little
separate boxes. How do I get them back to their default layout?
Shanbo26: Simple my ass.
Shanbo26: And WTF is a sprite?
t00nz843z: Openshot is good, but unfortunately for Linux only
Saeid Momtahan: I just downloaded it and it looks great. The only disappointing thing so
far is the lack of live preview in the main window. Preview opens up a new
window. I guess that'll be OK, but having it in the main window is a lot
more intuitive. Also I'm having to look for the 'Split' button. I haven't
found it so far. Other software That's an often used button and should be
available on the main screen. May be I've missed it and it's there. But it
looks like a seriously great program so far. Thanks!
Sara Naftaly: Okay, I made sure there are no gaps between images or sprites but still
there's no video. Any other possibilities? BTW thanks for the help.
Saeid Momtahan: I watched a few of your tutorials. It is a hard program to use. It's got a
lot of features, but everything is done in a new window and takes multiple
steps. For example a simple splitting and deleting a segment takes a couple
of minutes, while in AVS which is also a great program it takes a few
seconds. THe search goes on. Thanks anyway
Ally N: How do you split a video clip so I can add a picture in between?
Sara Naftaly: Thanks again. I created a beautiful slide show with music, exported it as
an AVI and all was well - until I made a small change in it, but when I
tried to export it again nothing came up in the Export Project window. I
tried right-clicking and adding the file from "VideoEditor" but nothing is
there, even though I saved the project there. Can you help me with this one
KB26: is this program safe? Sine its free and any other time I wanted a video
editing program there was a price. I am prone to trying to get it for free
LOL.... and downloading viruses... so is this program safe?
Suaxungxinh: I've searched but found no links about music. :(
Suaxungxinh: How do insert music in clip?
t00nz843z: First click on the video tab (located directly above the timeline) for the
clip that you'd like to apply the fades. Then from the top main menu,
select "Editor/Video Effects/Transparent/Fade In or Out".
FREE Basic Video Editing with VSDC Video Editing Software, Merging, Splitting, Cutting, Transitions4.6
out of 5