Ford F150 Exhaust Manifold Removal Part 3




People Who Liked This Video Also Liked

Ford F-150 5.4L 3v: Passenger Exhaust Manifold Replacement
Ford F-150 5.4L 3v: Passenger Exhaust Manifold Replacement
Ford 4.6L 5.4L 6.8L 3v Engines: Broken Exhaust Manifold Stud Removal
Ford 4.6L 5.4L 6.8L 3v Engines: Broken Exhaust Manifold Stud Removal
Ford F150 Exhaust Manifold Removal Part 1
Ford F150 Exhaust Manifold Removal Part 1
2004-2009 F150 Exhaust Manifold Replace Instruction Video / Broken Stud Removal Tool
2004-2009 F150 Exhaust Manifold Replace Instruction Video / Broken Stud Removal Tool
REVIEW: Everything Wrong With A Ford F150 5.4 Triton V8
REVIEW: Everything Wrong With A Ford F150 5.4 Triton V8

Did this video help you?

Jean Hooe: this guy is too funny. 

brutmaster08: It was the passenger side. To reinstall the wheel well just pop it back in there and use a few tree cone's, and some screws that go around the edge of the fender down the the mud flap. Thanks for Watching

david kierzkowski: what is needed to re-install the wheel well? is this the drivers side or passenger side?

brutmaster08: To remove the the plastic inner fender well, you have to remove mud flap, then the screws to the fender flare, then you should see some plastic clips in the front holding it in with some on the top. After they have been removed, you should be see what other screws or clips to remove. There might be one or two under the truck where mud flap was. If you still need help I can make a video of what to remove. Good Luck and thanks for watching!

rpiian: I know this is a stupid question, but how did you take the plastic fender well out? That seems to have opened up your working area quite a bit. Good call on the beer!
Rating:
Ford F150 Exhaust Manifold Removal Part 3 5 out of 5

Featured Video

How to Insulate Walls


Ford F150 Exhaust Manifold Removal Part 3