How To Build A Wood Burning Stove.




People Who Liked This Video Also Liked

Clearview Wood Burning Stove - A Quick Review
Clearview Wood Burning Stove - A Quick Review
Inexpensive and Very Functional - Ohuhu Stainless Steel Wood Burning Stove - Review
Inexpensive and Very Functional - Ohuhu Stainless Steel Wood Burning Stove - Review
Us Stove Company Us 2000 High-Efficiency Wood Stove Review
Us Stove Company Us 2000 High-Efficiency Wood Stove Review
Tiny House Tiny Stove - Hobbit Stove Review
Tiny House Tiny Stove - Hobbit Stove Review
Logwood Wood Stove Review and Assembly
Logwood Wood Stove Review and Assembly

Did this video help you?

Кроутолстыйгном Иванов: good oven, good job. this is my production version https://www.youtube.com/watch?v=_QgOe9GuCsY

GoatBoy 45/70: Seems to me being able to bypass the secondary burner would make for a less smokey start up with little or no smoke having to flow past the door end. The flat plate you welded on top should actually be inside and you could put a sliding gate directly under the chimney. Air could be introduced by a drilled steel tube at the mouth of the secondary burner and be plumbed to a outside air supply. Another air supply could be mounted low just inside the door for start up and throttling down the fire.
I like that you wanted a secondary burn as that makes the stove far, far more efficient.

WAKE UP!: Hmmm!

fixitmakeit: now thats a proper stove. (sos an egg on it) gonna have a look at the oil burner now. built both working ones myself. lotta work!

314 o98: why the inside of the stove is not showed ?

Remington Mcneese: Great to see that WoodPrix has new instructions to save my money and energy to build it.

Andrew Wiseman: that's very good

Владимир Путин: Go to woodprix if you'd like to build it yourself.

Anton Shkabara: Go to woodprix page if you want to learn how to build it yourself

Peter Lynch: no one adds an ash box, note to self

Eastern Explorer: One thing I would change with this is I would add an ash box. If you had another empty gas bottle cut the side out of it so it fits exactly inside the bottom of your stove and then then just weld some sides to it, maybe a small handle on the front. Put a cast iron grate over the ash box so the fire burns up top and the ash falls through to the box. if this makes any sense at all lol

Romelia Polly: This time I'll use woodprix instructions to make it by myself.

Paul Whitsun: Cute dogies

आर आर: With us forbidden so what must be taken from the TÜV for safety, fire protection regulation

Drew Speirs: I have found the easiest way to remove the brass tap at the top is with a 3 lb hammer, a couple of swats and it will be loose.

s mac: very impressed by your door hinge idea, I made a upright stove and used a pair of shed door hinges...... only lasted a few months before the heat burnt it off...Nice design and your smoke venting idea...good job mate.🙄

s mac: very impressed by your door hinge idea, I made a upright stove and used a pair of shed door hinges...... only lasted a few months before the heat burnt it off...Nice design and your smoke venting idea...good job mate.🙄

ifell3: That sign post that was knocked over, is it galvanised?

Seathasky: Song title?

poky loo: Thank you so much for the ideas on your video! By the way, just to throw it out there if anyone needs it, Woody Hyezmar's book is still available for free, google it…cheers!!
Rating:
How to build a wood burning stove. 5 out of 5

Featured Video

How to Insulate Walls


How to build a wood burning stove.