Victor Nunes: i have a big problem with a toshiba satellite c850-1GF...i can´t find the
Neil Chambers: I've an NB520. There are TWO U/T jumpers near the battery. I've tried
grounding the U's, the T's, the U's to the U's the U's to the T's etc.
Nothing seems to work. Any ideas?
MobTec2001: Hi. Trying this on an NB520 which looks very similar. There are two U/T
jumpers right next to each other and they are labelled JPW. I've tried both
- grounding the U part but doesn't seem to work? Any ideas?
seth181081: Hello i have the toshiba NB250-10N, can you plz teach me how to do it on my
indemmand: I'm trying to understand your question. I'm going to assume that you did
remove the password and now it's just giving you a black screen. If that's
the case you will need to remove one of the memory chips/sticks and turn
the laptop back on.
valdo: hola que tal hice los pasos que mostro en el video pero ahora me pasa lo
mismo que al usuario punkmental ¿que puedo hace?
indemmand: Read the comments and you will find the answer to your question.
Chaîne Fermée: i have Toshiba nb510 it's work ?
punkmental: perform the steps as it is in the video, but now when I turn on the netbook
only turn on lights on the hard disk and procesdor but not light, sounds
like you will understand and hear the fan but does not turn on, then off
and turns back on does the same thing over and over again You know I can do?
indemmand: reset your memory or remove one of the memory stick out and turn the laptop
chavah2006: the pin is G1 remove the plastic in the motherboard under the memory ram
MrCreepin247: I have a NB 205 toshiba , does the same process work wit it
indemmand: @as89ka Send me a picture of the memory location and I will try to find the
LVCYPHER HAWK: MUCHAS GRACIAS AMIGO FUNCIONO DE MARAVILLA!!!
indemmand: Go to my website for the email address and send us pictures of the memory
location without the memory installed. We need to see if we can see the
jumper. Your video is to blurry to find the jumper. Sorry bud, Regards
King Minos: @indemmand Thank you for replying. I took some pictures and sent them over
to you. Please check your Inbox. Again Thank you very much.
indemmand: @stonecoldhewett1 Look for the jumper around the memory area. The process
for your model should be the same as the A135 model. Check out that video
King Minos: Hi. I was wondering if you can help me unlock my computer. It is asking me
for a password at start up just like your video shows. I have a Toshiba
Satellite L675d and I already read tons of information over the internet
and no joy. I have watched all your videos and still no answer. I have
check in the memory area a J1, B500, etc. I cannot find any of that. Please
indemmand: ****If you need help and want us to approve and answer your comments. You
must subscribe first. If you don't subscribe your comment will be
Enric Torné: It woks!
indemmand: Yes. This process will work on the NB500
indemmand: Chavah2006 is correct. The L655 series has a G1 jumper.
dave brown: hi mate can u plz help me well i have done what u done and it worked fine
but when black screen comes and tried to press 1 to resume or 2 to set up
its seems like blocked pressed em few time no chance so what is the next
after the show ya that black screen ? can u plz help that will be grateful
indemmand: @as89ka Check your inbox for directions on how to remove the password.
dave brown: hi mate can u help plz i have done same thing like u did and worked but the
black screen seem blocked i cant press f1 setup f2 resume , that wud be
grateful if u can help thanks
indemmand: Send me a picture of the memory location and we can see if we can find the
jumper. our email address is on our website.
poppa smurf: help!!!!!!!DUDE PLEASE TELL ME HOW TO REMOVE BIOS PASSWORD FOR TOSHIBA
King Minos: @indemmand I just want to thank you for your help. It worked. You are
awesome man. Thanks a bunch.
Robotuba: I tried this and it worked! I am going to check out your other videos as I
do similar work and this one was so unexpectedly worth it. Great job. You
just opened up a new area for me.
indemmand: Send me a picture of the memory location and we can try to find the jumper.
our site is on all our videos and you can find our email address there.
indemmand: Thanks for Subscribing to your channel. We are looking at the pictures you
sent us and will get back to you shortly.
Dennis Blewett: Worked great. It was the orange face looking-thing with the letter U on it,
and then I touched it to a piece of metal that looked like it was on the
surface near the latch for the RAM.
chavah2006: For toshiba L655 the solders is G1 they are tos small triangle located
under the memory dimm, You need to take off the plastic in the motherboard
to get access to this pins. para la toshiba L655 el pin es G1 localizado en
la motherboard abajo de la memoria RAm necesitas de quitar el plastico
pegado a la motherboard para ver este PIN,
Randall Hewett: Hi I was wondering if you can show me how to reset my bios jumper for A105
S1014 I cannot locate the spot to jump the bios password, please help I
have subscribed thank you
Daniel Ali: Thanks your videos helped...subscribed and added to favorites..... For
those of you with the Toshiba Satellite Pro L750; follow the instructions
on this video except use the G2 and G3 pins....note G2 and G3 will have 2
triangle looking solders each...in my case i used both of them and grounded
them with the 'memory ground' as shown on this video and i waited for about
60 secs on each of these solders. be ready with F2 on first re-boot after
the Toshiba logo and then boom...bios access
Jose Leon Pastora: Muchas gracias. Me funcionó, borro el password de la bios, ahora el disco
duro me pide la contraseña.
indemmand: You can try to see if anyone has posted a similar model on our videos or
take some pictures of the memory location and send it to us
indemmand: @as89ka I'm glad it worked for you, Regards!