edward bibriesca: Thanks for replying but I had other questions. Do I need to instal RSD lite
or something like that because iv heard from other sources I need that.
And if I don't need RSD lite, do I just follow all your steps and it will
work? And I'm from America so do I need to switch my baseband?
Thanks for the feed back, I'm looking to do this soon but I needed to ask
you some questions.
edward bibriesca: Hey thanks for the video but I'm kinda scared to instal cm7.1 on my phone,
I'm sure installing cm7.1 and cm10 are the same thing but I had a couple
questions, could you answer them?
1. The lens on my phone are red I think because I check the lens and they
were red and my phone is a 525MB. Will it work on that type of defy?
2. Does the wifi work and does the google apps work on cm7.1?
3. When I rooted my phone, I used ginger break app from the xda website and
the first boot it stayed frozen on the start up menu but when I took out
the battery and rebooted it worked fine, if I do this, will it freeze?
4. Does Facebook work on cm7.1 or cm10? I use wifi only and I want to be
able to use my wifi and my Facebook.
Please answer these questions, I want to instal cm7.1 but I'm scared it's
not going to work, even though I have everything set up right now, I just
need to instal the boot menu and instal cm7.1
edward bibriesca: I explained this wrong, look right now I currently have my phone rooted and
the cm7 file and the google apps and the 2ndint app, they are not installed
but I have them ready to instal .... I never used any motorola drivers or
RSD lite. When I boot up my phone, it shows a the normal motorola logo, not
the red one. When I rooted my phone I used the ginger break app to root it.
My question is, can i instal cm7 without those motorola usb drivers or the
RSD lite? I already told you what I have on my phone right now so yeah you
can tell me if I can do it or not.
stas veverita: thanks man
Sourén Hamparsumian: Thank U very much for the video. I did everything is described in it & the
result was fantastic except one thing & I hope I can find a solution for
it. the problem is that I get an error message says UNFORTUNATELY ANDROID
KEYBOARD (AOSP) HAS STOPPED. & I don't know how to fix it I rebooted the
phone, but in vain. Thanx again.
edward bibriesca: Ok thanks but in what video do you instal it in? I'm talking about the usb
driver. What part?
Just give me that information and I think that's all I have to ask you.
Yoan Pacquelet: I've finished to install CM10 on my Defy, for the moment it runs smoothly,
main functions are ok (phone, email, sms, web, market)
Thanks for your video
Daniel Artigas Perez: does work defy +??
alexhuru156: Does work on defy mini
PK Duong: Can i apply this for Defy having GREEN lens?
Akzuu Boye: does work defy mini xt320 . Answer fast
Anurag Hakeem: Hi. Instead of an apk, I have a zip file. How do i install it?
edward bibriesca: Never mind, I watched it
Aha, it looks like I'm not updating to cm 7 sadly. Installing the usb diver
is something I can't do since my computer I can early use and installing
the usb drive involves bricking your phone and it's all too much.
If there is a way to instal cm7 other than using the usb drive, then send
me a message because I'm not installing the usb driver.
Marko Takovac: Works perfect for me! Thanks a lot!
Pranav Chavan: Thanks Brother !
Brown G.: Thank you dude! You saved my money, cuz, because of this i didnt buy a new
Magesh j: hi.. ur tutorial is very good...but boot menu is completely different..
mine is defy mb525 android v2.2.. how to get the boot menu as urs??
Erik Boraas: i installed all of the things correctly, but when i try to select my area
in my advanced settings, it wont let me choose where i live in canada and i
am on telus
stas veverita: metod working
Vinicius Gimenes: does work with xt560 (Defy Pro)?
Don Corleone: I don't get the blue light =/. What could be happening?
I cant get the 'recovery menu.
I'm using motorola mb525, thank you
alexhuru156: It works on motorola defy mini
Orlaine Pereira: Thanks for the video. But I am stuck after I install sndit. I am getting an
error saying "is superuser installed"? And I am on a defy+ v2.3.6. any
abhishek bhatia: I did everything , 2nd int was installed ,cwm was installed successfully
but after doing all the steps in the video When I try to install rom from
zip card it says installation aborted :(
nice video btw.
DownThePark: Thank you so much!
Abdul M: Great tutorial. Helped me unbrick my defy.
gundamwing789: Lets say right now I have cm7 nightly on my defy, if i wanted to flash to
cm10, would I have to flash cm9 or can i go straight from cm7 to cm10? also
would i need to flash a different kernel? I believe i am still on the froyo
Igor G: thanks man,it helped!;)
martinlross: You sir are a genius. I followed every step EXACTLY as you recorded it and
it worked. Thanks for giving the old moto a new lease of life!
locslikes: just use one from another country that uses the same network bandwidth and
it should work fine.
rayaroun: help me out here man!! please :)
locslikes: i only take the sim out if i'm starting from scratch. ie. flash sbf and the
root then upgrade but when i go from JB rom to another JB rom i just leave
my sim in.
Emil7773: I had the same problem with that CM 10.1 and had to flash it with CM 10
Also, i try with 10.2 and my camera didn`t work
weekendcss: Ive tried. but I got an error when i tried to install 10.1 -> installation
aborted when tried to install:) what did i miss?:/ mb that cwm is too
old?:/ or what? do u know anythin about that how to solve it? because i got
this message 2 times in a row ..
DjNiko17: Help please, i followed the tutorial and now my phone gets a popup saying
the keyboard stopped working. Also, i cant connect it to my pc because it
doesnt ask me if i want to use usb mass storage device or phone portal or
omfgsqueak: Any bugs on defy with cm10? camera features work well?
Cristian Filip: setup wizard stops please help
gundamwing789: Ok, great thanks! i have a couple more questions i just want to make sure
of. Is the build you are using now stable and fast (good for a daily
driver)? Also, i saw that you didnt need to flash a different kernel before
flashing the 2ndboot cm10? So im assuming i dont need to either? Btw, im
coming from epsylon3's cm 7.2. So technically i could just bring all the
zips to my sd card, clear the device (factory reset, cache, dalvik cache)
and flash the 2ndboot then gapps like you did?
Karadjordje Trkulja: 4 bottom buttons on this device are dead! I have tried DroidExplorer to
control some things from PC and I see the device's screen but clicking is
not working. Even I can't reboot to recovery cuz this phone is stucked to
android logo. (the recovery logo) Nothing to do... but the phone is working
correctly. I need to upgrade to new jelly bean that I find on XDA website
that includes "inscreen" 3 basic buttons... just to save this poor device
with that way... Any help please?
stra vat: well.. i flashed the sbf again, did all the steps from your videos..
and....YES! IT WORKED!! now i am running jb very very smooth. thanks for
Ned Cabaniss: The installation worked like a charm. I used Android 4.0.4 (ICS).
Unfortunately, when I went into broadband selection, America only offered a
t-mobile option. I am using an ATT sim card (850 and 1900). Is there a fix
for this? Thanks much.
Saketh Reddy Velapati: I installed 4.1.2 and gapps for 4.1.2 on my defy+ The phone is stuck at
cyanogenmod boot logo forever. Did i brick it ?
Skin Care/Whitening/Acne Solutions: Got it. I used an older version. 2.
Ned Cabaniss: You are a genius. That works. Thanks much. BTW, I bought an unlocked Defy,
so I am able to use ATT.
locslikes: You can go straight from cm7 to cm10. in these videos i restore my defy
back to default and then root, install cwm and then install cm10 no problem.
locslikes: there is no best version. try them and see which one you like!
weekendcss: Could you help me please?:/ I just did all the steps.my phone is working
well,but it doesnt recognize my SD card...nor another one SD card. and i
cant even switch my bluetooth on. what should be the problem? please help
me :(( I dont know what to do.. and ofc the 2 SD cards are formated to
FAT32 so that should not be a problem.. but always when I try to go to
settings and go on storage. it says. the application settings stopped
locslikes: from what i understand no it won't but could be wrong.
Quique García: does the led work?
bassiejnl: is this still the best version to instal?