Meddeb Mohamed Ali: switching the error signal is possible. But when i start the engine without waiting for the led lights to switch off, the error appear again
Caren Tong: Hi, Thanks for your video. I have a Punto mk2 1.2 16v 2001. The airbag light is also the problem for me. I have connected everything as shown in your video however when I press "Connect" it says no response from ECU, check settings or port. What can I do? Latency is already set to 1. Interface and Test worked fine.
nickygoddard: do i need the red cable or can i just connect kkl vag straight into the car thanks
gary robinson: ok bort the cables plugged in and scan for new interfaces picks up vagcom on obd3 but every time i test it times out right at the end any ideas ??
gary robinson: ok got software but unsure on what pwer steering module it is ??
gary robinson: link comes up with cable for audi skoda golf etc ??
OMG! Its Jesus: Hi PuntoHowTo, On my '01 1.2 8v Punto, the airbag light goes out, yet my passenger isolation light continues to flash, no matter which position the switch is in. Any thoughts? Does this point more towards the Isolation switch fault in your other video? Many thanks.
James Clegg: Hello im trying to reset the puntos airbags but am not sure which airbag to click
Don Ng: I stopped my punto at red light today and suddenly my car starts vibrating and it shows Battery Warning and Oil Ｐressure warning.. What are the possible problems?
I bought it from a previous owner this way. Is this system you offer likely to work though?
Terelle2010: Will it fix
02 Airbag control unit supply low voltage Resistance too low
14 Deactivation switch front seat passengers airbag signal improbable
Stuart Graham: Hi.I have a punto mk2 on a 52 plate..i brought both leads as in ur video..i connect the leads n scan for hardware (1,33 in video) but get no test button.. can u help
Federico Pereyra Lucena: Im going for scan tomorrow because of that airbag light, i hope is nothing and it can be fixed easily.
Carlos Speroni: donde enchufo Obd2 Elm327 palio Bluetooth fiat palio td
bobl78: what is the Name of the Music at the beginning of the Video ? Thanks
Armando Arvizu: If i got the Bluetooth version of that elm327 do I still need the adapter for specific things? Also does that one read abs codes?
Francisco Santos: Hello my name is francisco I live in Sintra Portugal Can you help me, I bought the KKL cable / with. to turn in my car fiat doblo 2006 but I can not connect to fiatecuscan program. ja sa istalei drives the cable but the cable priate care and realize at the end of the test to take the test cable, announces that the time has expired. Do I need another adapter cable. my email is email@example.com appreciate your help
Simon Loveridge: How do I find out what airbag is in my 2000 punto thank u
jasbir grewal: i have bought kkl vag leads and connected everthing up but in the bottom left hand side it is saying that it is not connected
Keld Hansen: I have experienced problems with connecting an ELM327 OBDII to USB interface, to my 1999 FIAT Punto 1,2 8V, even if the computer COM port is configured correctly and this is verified by the interface test in the Multiecuscan software. It appears that the ELM 327 interface simply doesn´t connect to the cars interface.
Can anyone help me ? Is my car not compatible with OBDII or does the cars interface only run 9600 bps ?
Any other idea ?
Thanks in advance
Fiat Punto Airbag Light reset (1999 - 2006)5
out of 5