Robin Steal: Man o man you make it look so easy. I'm new to all of this and just setting up my first bow. Seems to me the key advice as you have mentioned is patience which thank goodness I do have quite a bit of. Slow, methodical and step by step is how I'll proceed and watch your video who knows how many times until I nail it. Got a Peep Eliminator after seeing your review on it. That's next to install.
Ike's Outdoors: @atwozed123 Try this one (take out the extra spaces) youtube . com /watch?v=vUE-JcEjHzE
Andrew Zindilis: A lot of the setups are not filmed at close up
Ike's Outdoors: @RussFlukeOutdoors rooster vane up works best with this rest
Ike's Outdoors: @MAIDEN068 If they are not timed right they will have clearance issues. I made a new video showing how to time them. You should be able to find it on my channel. If you can't let me know and I'll send you a direct link.
Ike's Outdoors: @civicblizz No offense taken. I am always willing to learn from others. Thanks for the advice.
jZENO186: I have the 09 Admiral with the rip cord rest. When the rest is in the down position, the launcer arms are hitting the riser shelf. This is preventing the rest from going completly down and i am having clearance issues. What do you reccomend?
bluelagoon10023: my vanes hit the bottom of my rest does that mean my nocking point is too high?
Ike's Outdoors: Anything is possible. I have seen stranger things knock a bow out of time. If you had to much pressure on your downward cable at full draw it may pull one cam out of time. I have never had a problem with this happening though.
Ike's Outdoors: I used the biscuit for a long time and was intimidated by the setup on these fall aways. When the rep brought one into the shop and showed me the set up I switched and never looked back. I love my Ripcord and they are a great company to deal with.
Ripcord Arrow Rest Set-Up and Installation5
out of 5