Reginellicapone: Please upload a vid on how to remove and install a bumper cover for 00-05
multiFACEted Michael: Thanks for posting. Changed bulb in 4 minutes, didn't even need the
Matthew Calcote: Thank you for making this video!
mdmyer: Much easier than I thought it would be :)
Peter B: Thank you.. Very helpful video.
Tom Dee: Handy thx
Danielle Riley: Very handy video. Thank you.
Tim Goode: Thanks a lot! Turned a car repair into a $10 job :D
Gustavo Leon: this videos are saving me money thank you i can do this myself thank you..
Reginald Walters: My 02 is just like this only its the base model. My headlights are so
cloudy, they must be the originals. I hope to order some soon.
1A Auto Parts: You have to replace the entire assembly. There is no good way to take apart
the headlight cover.
Lo Ing: Thats for the video man
1A Auto Parts: @tarametalbabe Glad to help!
waterkeeper03: 3:27 = why mechanics make $60 hr Thanks for the vid. my lights on my 04
have hairline cracks all through them making them look hazey, my car is
otherwise really clean and shiny still.. new headlights off amazon made it
look like a new car again. this is a 1 beer job.
RosettaStoned06: after watching this it took me just five minutes to replace both low beam
bulbs, thanks for the vid!
beekeeptim: Any videos on how to replace back up light bulb in trunk lid on 2001 Impala?
1A Auto Parts: @TheRattlehog Thank you for checking out our 00-05 Chevy Impala headlight
aloys gk: you are genius thank you so much man .....
heavychevyrida89: How would I go about installing a HID light conversion kit on a 03' Impala
1A Auto Parts: You most likely have something wiring incorrectly in the headlight or you
have poor quality ballasts. Both of those can cause the issues that you are
Dale White: I will now change both headlights in my 02 Impala. Looks so simple! Thanks
1A Auto Parts: @l3londie13 The issue with your blinker flashing rapidly typically is
caused by a bulb being out.Such as a blinker bulb or possibly a taillight
bulb. You may also want to check the fuses in your vehicle to see if they
aprox23: Thanks bud, your videos really help me out. Thanks for taking the time and
Xxoo0o0o0ooxX: Thanks :-)
Zooropa420: Changed the driver's side low beam on my 2001 Impala just now in about 90
seconds...piece of cake. Thanks!
John Peterson: THANK YOU! It took me two minutes to change my high beam! You made it so
1A Auto Parts: @TheRattlehog Thank you for visiting out auto repair channel on YouTube.
1A Auto Parts: We currently do not have an auto repair video of this but, you should be
able to reach it on the backside of the trunk lid.
Angela Mahowald: Thanks so much for having such detailed tutorials for your viewers!!! We
really appreciate your help(:
John Wickert: @1aauto No it does not have the Factory Fog Lamps
dNkc2009: Hands down perfect video!
1A Auto Parts: @leependavis The trailblazer is coming but I dont have a subject vehicle at
marykate murphy: I bought two new lights from your company to replace the oxidized ones on
my impala. It was very easy to replace, however, the lights do not turn on.
The blinker on the driver side works, the blinker on the left side is
blinking rapidly. If I pull the shaft to use the bright lights they come on
but the lights do not come on. Suggestions??????
1A Auto Parts: @walterv50sela If we happen to get one back in the shop again, We'll keep
it in mind on our list of things to video for you guys.
David McClellan: For those skeptical about those clips coming out that easy... they really
do. They slide right out of there.
1A Auto Parts: @luvtheoldstuff '66
1A Auto Parts: HI Brent, You could get a good quality set of light bulbs from your local
auto parts store. Walmart even would carry them in the automotive section.
hope this helps you out. 1aauto.com 888-844-3393
1A Auto Parts: Replacing the headlight is very easy for the diy. The dash lights could be
your headlight switch. Can you get the lights to flicker or come back on by
turning or jiggling the headlight knob? If so then you'll need to replace
your headlight switch. We don't sell the switch yet. Replacing the switch
itself is not difficult, getting to it maybe though. I'll put this on the
list to do when I have access to that Impala again.
Zooropa420: Thanks for the vid. I thought I would have to go in from behind the housing
to change the bulb, which left no room for my hands. This looks easy. I
will try it and check back in.
walterv50sela: @1aauto Thanks
Blanche Evridge: Thank you very much. You saved me $10.00 at the Repair Shop, because I just
changed my own Lamp according to your video. For the information of others,
there are only 2 steps to removal for the 2005 Malibu Classic - Just the
two clips to Pull Up. I gently used the claws of my hammer since I did not
have strength to pull it up with my fingers. Thanks Again.
Vlad Chichilo: Great video! I watched it and went outside, did it in 5 minutes. Thanks! I
went from ugly yellow to crystal white light
Lee Cosey: do you have any vids on trailblazer? Same vid just with a trailblazer
littleelvisofMA: NICE VIDEO, 2005 chevy impala is my car!!
KingPenguin2112: Thanks for the video, I replaced my light OK but the plastic clamp that you
get out with the screwdriver at the very beginning doesn't seem to want to
snap back in very tightly.
Godpir: Great video, I was needing to know how to replace one of my headlights, and
now I know. Thanks for the great Tutorial.
GETYOWIGPUSHBACK: Can you please help me, i have a 92 chevy caprice, i put new HID headlights
on,,,every time i cut the headlights on the signel lights go out,,,,,,then
when i turn the headlights off the signel lights work,,can you please help?
Matthew Little: thanks man!
coal4life: Thanx for the post. Installing better bulbs in my 03 and having never owned
a car this new I was stumped. Would you reccomend pulling the fuse on the
airbag sensor before doing this job?
1A Auto Parts: @travthesavage There should be a couple of screws on the backside on the
headlight that you can turn to adjust them.
How To Install Replace Headlight and bulb Chevy Impala 00-05 1AAuto.com4.7
out of 5